Steel

Skylight Sheets/Translucent sheets

Skylight panel is a perfect source for free lighting inside factory, industrial sheds, stores, ware house during daytime. Skylight can be installed in places like public areas, restaurants, transportation centers

Now a days, the requirement for the polycarbonate roofing sheets is been increasing progressively in all over the world because of natural source of lighting. These sheets are reasonably valuable and well used in several households and commercial setups

Descriptions

Skylight panel is a perfect source for free lighting inside factory, industrial sheds, stores, ware house during daytime. Skylight can be installed in places like public areas, restaurants, transportation centers

Now a days, the requirement for the polycarbonate roofing sheets is been increasing progressively in all over the world because of natural source of lighting. These sheets are reasonably valuable and well used in several households and commercial setups

The Skylight Sheets are now best solutions for commercial & large manufacturing buildings. These pre designed roofing sheets are best source of energy saving that don’t need massive number of man power to build and install.

One of the main benefits obtainable by the Skylight / Translucent GRP sheets is that it provide a lot of free light instead of entire darkness in the building. There are several areas in which some partial sunlight is necessary for the open garden, patio, facility, poultry, warehouse etc. Even though these sheets present many benefits, still there are some definite Advantages that make them the first option of selection for several property owners.

Light Transmission: 84%+/-6% ASTM D1494

Mechanical Properties

Tensile strength: 7.9kn/cm^2 ASTM D638

Compressive strength: 16.3kn/cm^2 ASTM D695

Flexural Strength :13.82kn/cm^2 ASTM D790

Flexural Modulus :727 kn/cm^2 ASTM D790

Barcol Hardness :40 to 60 ASTM D2583

Impact Strength :471 J/m ASTM D256

Physical Properties: Density :1430.9kg/m^3 ASTM D792

Water Absorption :<0.26% ASTM D570

Thermal Property: Thermal conductivity :0.146w/mk    ASTMC518

Tolerance on Length, width and Squareness.

Length: Sheets up to 5m long. +/-10mm

Sheets over 5m long. -10mm, +15mm

Width + /- 5mm

Squareness: the variation will not be more then 0.6mm in every 100mm of width within the Sheet tolerance (End square 6mm)

Thickness : -2mm +2mm (+/-2mm)

Trafficability

Roofs are unsafe places to work and it is suggested that the following information be integrated In the” Health & Safety fi­le”

No individual should have right of entry to  roof except the direct supervision of an experienced roofer

who should be amply knowledgeable to assess any risks and take the necessary action to reduce such Risks.

Mechanical Specification

Thickness: 1mm—6mm

Color:- Mill Finish, All Colors Available (Standard Color 9002, 1001)

Profiles: – 32/200 , 35/200 , 45/150, 45/250, Tile (If any other profile can be supplied after sample approval).

Need Help?